klemet banshee Posted September 30, 2009 Report Posted September 30, 2009 so i had a custom swingarm made -1 and my old chain got to shitty to use so i got a new one adjusted the tension so its all the way in. put the chain up to see where i should cut it and its pretty tight but the links dont match up. so i back it off a link and its loose as hell! and even when i adjusted it out it was still too loose. anyone recommened anything? Quote
Larry's Shee Posted September 30, 2009 Report Posted September 30, 2009 Change gearing slightly or half link. Quote
klemet banshee Posted October 1, 2009 Author Report Posted October 1, 2009 what do you mean by change gearing? up or down? and i check my local harware stores and they didnt have the right size?? help please!!! Quote
Larry's Shee Posted October 1, 2009 Report Posted October 1, 2009 My son had same problem, 13t front, don't know rear. To tight ,add link too lose. He found a place East side of Detroit for half link. Check with local shop they might be able to get one for you. As far as gearing try up or down one tooth on rear sprocket if you have them. If not I would go with half link. Might have to Google to find one. BTW, half link has roller on one end and pin on other. Not trying to be smart a$$, just trying to explain. The whole problem is that there just isn't enough adjustment on the axle. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.