RILS Posted September 26, 2009 Report Posted September 26, 2009 (edited) I have a set of ported stock cylinders that I ran before I went to a cub. They are for a stock stroke and and on 65mm bore. I also have a set of pistons that can go with them if you want them. They have been sitting in my shop and will need a hone they had about 10-15hours on them when removed. The exhaust is around 192 I believe and the transfers are really opened up and raised a bit also I cant remember the # though they were ported by a guy over at planet sand I may can locate his info if needed, This is a really stong set of cylinders I ran them 185psi with trinity pipes and cpis I ran stock carbs with them and 34pjs both worked very well They have good bottem with big time mid and top. I will take $250 for them with the pistons. I also have a set of 34pjs that I will trade for some 33s or a good single setup. I would also like to trade a set of 18cc domes "noss head" for some 21s or 22s. I got old and tring to get my cub tamed a bit for some trails and such. I will get some pics asap they are in elberton ga. Edited September 26, 2009 by RILS Quote
RILS Posted September 26, 2009 Author Report Posted September 26, 2009 I have a set of ported stock cylinders that I ran before I went to a cub. They are for a stock stroke and and on 65mm bore. I also have a set of pistons that can go with them if you want them. They have been sitting in my shop and will need a hone they had about 10-15hours on them when removed. The exhaust is around 192 I believe and the transfers are really opened up and raised a bit also I cant remember the # though they were ported by a guy over at planet sand I may can locate his info if needed, This is a really stong set of cylinders I ran them 185psi with trinity pipes and cpis I ran stock carbs with them and 34pjs both worked very well They have good bottem with big time mid and top. I will take $250 for them with the pistons. I also have a set of 34pjs that I will trade for some 33s or a good single setup. I would also like to trade a set of 18cc domes "noss head" for some 21s or 22s. I got old and tring to get my cub tamed a bit for some trails and such. I will get some pics asap they are in elberton ga. These jugs ran so well if I still had the stk stroke I would take the cub off and sell it for a dune/drag all purpose application these are the ticket. Also if it makes a difference I could take care of the hone the pistons included were ran with these jugs and they were bored to size. If you are looking for a way to outrun the 4strokes these and a set of trintys or cpis everything else stk will do it with ease 140-150psi really goes good with them as well. Quote
Brent Posted September 26, 2009 Report Posted September 26, 2009 These jugs ran so well if I still had the stk stroke I would take the cub off and sell it for a dune/drag all purpose application these are the ticket. Also if it makes a difference I could take care of the hone the pistons included were ran with these jugs and they were bored to size. If you are looking for a way to outrun the 4strokes these and a set of trintys or cpis everything else stk will do it with ease 140-150psi really goes good with them as well. what u take without pistons I just need cylinders Quote
RILS Posted September 26, 2009 Author Report Posted September 26, 2009 what u take without pistons I just need cylinders Make me a offer. Quote
Brent Posted September 26, 2009 Report Posted September 26, 2009 Make me a offer. I can't answer pm's but would u be interested in some other cylinders and boot Quote
MRMOONEY Posted September 26, 2009 Report Posted September 26, 2009 I can't answer pm's but would u be interested in some other cylinders and boot I got some stock port stock bore ( they will need bored ) if your interested how much boot you looking for with these jugs? Quote
RILS Posted September 27, 2009 Author Report Posted September 27, 2009 (edited) I got some stock port stock bore ( they will need bored ) if your interested how much boot you looking for with these jugs? Fellows I have tried to post some pics but cant get it to work right now. I dont need any trades I have a bone stock set of jugs also im not into the banshees like I used too be. I can email pics if somebody wants me too. I also have various other parts like a stock timing plate, jets, stock carbs,pods for them a couple of stock heads a stock crank with rods just ask I might have it if you need something. The jugs are up for offers as well so feel free to shoot me a pm with offers or questions. I have a new project im doing and just need a little extra cash. I would be interested in trading some of this stuff for garret turbos t3,t25,t28 or some nissan turbos off 300zx lets just say if you have a turbo let me know I might trade for it. Edited September 27, 2009 by RILS Quote
bode1 Posted September 27, 2009 Report Posted September 27, 2009 Fellows I have tried to post some pics but cant get it to work right now. I dont need any trades I have a bone stock set of jugs also im not into the banshees like I used too be. I can email pics if somebody wants me too. I also have various other parts like a stock timing plate, jets, stock carbs,pods for them a couple of stock heads a stock crank with rods just ask I might have it if you need something. The jugs are up for offers as well so feel free to shoot me a pm with offers or questions. I have a new project im doing and just need a little extra cash. I would be interested in trading some of this stuff for garret turbos t3,t25,t28 or some nissan turbos off 300zx lets just say if you have a turbo let me know I might trade for it. How much are you looking for on the other set of jugs? Quote
RILS Posted September 27, 2009 Author Report Posted September 27, 2009 How much are you looking for on the other set of jugs? The stock ones? Ifso I really havent thought about it Ive only located 1 of them but I feel like I could find the other one. What are they worth they are stk port,bore came of my basically new 2004 banshee they will need a hone too but you could still see the factory crosshatching in them when i took them off. Quote
bode1 Posted September 27, 2009 Report Posted September 27, 2009 I'm looking for a cheap set to do a 4mil. Not in any hurry, just looking for the right deal. Quote
Brent Posted September 27, 2009 Report Posted September 27, 2009 I'm looking for a cheap set to do a 4mil. Not in any hurry, just looking for the right deal. I've got a set that's fairly fresh they are at 66.25 with some clean up work if I can sell these I would like to get his to put on my shee if anyone wants them make me a offer I need his set bad Quote
RILS Posted September 27, 2009 Author Report Posted September 27, 2009 The cylinders,crank and pistons are sold pending payment. I still have a stk timing plate, stk exhaust I have set of proflow intake spacers stk carbs with pods I also need a working carb for a warrior I will trade something out for. Quote
RILS Posted September 27, 2009 Author Report Posted September 27, 2009 (edited) The cylinders,crank and pistons are sold pending payment. I still have a stk timing plate, stk exhaust I have set of proflow intake spacers stk carbs with pods I also need a working carb for a warrior I will trade something out for. The cylinders and pistons are sold. The stk crank is still here. I will take $100obo shipped for it the crank its a very low hour out of my 2004 it has been sitting and has some surface rust on the ends but can be cleaned up and used all the bearings are in good shape. I also have a bunch of jets for stk carbs if somebody wants them. I can send email pics. Edited September 27, 2009 by RILS Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.