Piped banshee rpm range?

[KickAssbanshee111]

I have a banshee. mostly stock. toomey t5 pipes,270 jet,k&n air filter pods, v-Force 3 reeds, +4 timing plate, and i always run 32:1 oil/gas ratio.

 

 

Any idea what the maximum rpm range of my shee is? Oh, and what pipes gets you the most rpms for a stock motor?

[mopar1rules]

if i recall correctly, the t5's on stock porting, will pull up to like 9000. there is a dyno sheet floating around on here somewhere. i'm going to try and find it and then post the link.

 

here is the link to a topic, where i asked pretty much the same question. about 1/2way down the page, there would have been a pic posted by snope, of a pipe dyno comparrison, that for some reason isn't showing up anymore. also, there is a link posted, like another post down, w/a link to some dyno sheets. for some reason that link isn't working either. don't know why.

 

http://bansheehq.com/forums/index.php?showtopic=112482&view=&hl=dyno%20sheet&fromsearch=1

Edited September 26, 2009 by mopar1rules

[mopar1rules]

this one can kinda be helpful...

 

http://www.angelfire.com/extreme2/yambanshee/techtips/pipes/pipeinfo.html

[Snopczynski]

9,500 rpm if I remember right.

[yfz350rider]

Looking at the power curves on that link im pretty happey with my Pro Circuit pipes. The Toomey's look like they have a nice curve too, but them dyno port pipes just plain suck.