jones20992 Posted August 17, 2009 Report Share Posted August 17, 2009 give me ideas please Quote Link to comment Share on other sites More sharing options...
STINKYDELUXE Posted August 17, 2009 Report Share Posted August 17, 2009 I would say 18mm or bigger with a DM, DMX or big Twister is a safe bet I've heard of turbos throwing up big numbers but tuning is vary difficult. just my .02 Quote Link to comment Share on other sites More sharing options...
2/2 many banshees Posted August 17, 2009 Report Share Posted August 17, 2009 Alot of $$$$$$$$$$$ Quote Link to comment Share on other sites More sharing options...
ny98banshee350 Posted August 17, 2009 Report Share Posted August 17, 2009 matoon cases for 1 Quote Link to comment Share on other sites More sharing options...
shanYE west Posted August 17, 2009 Report Share Posted August 17, 2009 10k or more.. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted August 17, 2009 Report Share Posted August 17, 2009 10K and at least 600 cc's of naturally aspirated, You could build a 10 mil cub and spray 25 a hole...that will get you there. Up to you. Quote Link to comment Share on other sites More sharing options...
jones20992 Posted August 17, 2009 Author Report Share Posted August 17, 2009 (edited) matoon cases for 1 check iam thinking +12 76mm Edited August 17, 2009 by jones20992 Quote Link to comment Share on other sites More sharing options...
shanYE west Posted August 17, 2009 Report Share Posted August 17, 2009 billet cases are not "needed". Quote Link to comment Share on other sites More sharing options...
FireHead Posted August 17, 2009 Report Share Posted August 17, 2009 billet cases are not "needed". I agree. A 10mil is about the minimum stroke-wise that you can get that kind of power out of. :geek: Quote Link to comment Share on other sites More sharing options...
jones20992 Posted August 17, 2009 Author Report Share Posted August 17, 2009 (edited) billet cases are not "needed". what do you feel is needed for a build of this level also i am open to the use of water/ meth injection and ....would ypvs be a bad idea ? Edited August 17, 2009 by jones20992 Quote Link to comment Share on other sites More sharing options...
2/2 many banshees Posted August 17, 2009 Report Share Posted August 17, 2009 also i am open to the use of water/ meth injection and ....would ypvs be a bad idea ? YPVS why and how ?? Quote Link to comment Share on other sites More sharing options...
shanYE west Posted August 17, 2009 Report Share Posted August 17, 2009 Simple 10mil cub on stock cases with a shot of NOS should net you in the 150's (depending on whos dyno) if your looing to keep it on motor. 18mil DMX are being done on stock cases by numerous builders and are getting around 180's.. There is alot of ways to do it.. the question is.. how deep is your pocket. Quote Link to comment Share on other sites More sharing options...
jones20992 Posted August 17, 2009 Author Report Share Posted August 17, 2009 how about this 635cc T-REX Cylinder kit for Banshee. 76 mm Bore for 16mm stroker cranks with 130 mm long rods. Part# T-REX7670 ypvs delta v force reeds race port ? Quote Link to comment Share on other sites More sharing options...
dajogejr Posted August 17, 2009 Report Share Posted August 17, 2009 With a lot of porting, maybe.... Before I went with a TRex setup, I'd go billet twister or dm/dmx cylinder. Quote Link to comment Share on other sites More sharing options...
shanYE west Posted August 17, 2009 Report Share Posted August 17, 2009 how about this 635cc T-REX Cylinder kit for Banshee. 76 mm Bore for 16mm stroker cranks with 130 mm long rods. Part# T-REX7670 ypvs delta v force reeds race port ? on alky with the right porting, domes and carb setup.. maybe.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.