1996dragshee Posted August 11, 2009 Report Posted August 11, 2009 Port Magic (Rudy Kurtz) drag ported 10 mill T-rex cylinders fresh resleeve 75mm bore not ran since, t-rex coolhead with domes,brand new base gasket and coolhead o-ring kit,my 76.5 pistons for future needs,v-force reeds & intakes,powervalve block offs....you will need to get pistons for the new 75 bore. $1000 shipped plus paypal fees. Costed me almsot 7 to resleeve it and i payed well over that when i bought them... Oh these are capable up to a 78 bore now i was told http://p1.bikepics.com/pics/2009%5C07%5C30...740752-full.jpg http://p1.bikepics.com/pics/2009%5C07%5C30...740752-full.jpg http://p1.bikepics.com/pics/2009%5C07%5C30...740758-full.jpg http://p1.bikepics.com/pics/2009%5C07%5C30...740760-full.jpg http://p1.bikepics.com/pics/2009%5C07%5C30...740771-full.jpg 39 pwk snomo alky carbs set up by Tyson with 14" filters & powerjets- $325 shipped...I also have a pump for another 20.Ran these half a season since converted.the carb caps and slides/needles are included just not pictured http://p1.bikepics.com/pics/2009%5C07%5C30...740750-full.jpg Raw Big Bore Big Flange hand coned 2 out the right side Shearer pipes...bad azzzz pipes...I have both bolt on silencers and stingers for them.Currently for o-ringed cylinders- $450 shipped http://p1.bikepics.com/pics/2009%5C07%5C30...740745-full.jpg http://p1.bikepics.com/pics/2009%5C07%5C30...740748-full.jpg LSR aluminum drag axle with all banshee hubs.The outside splines are a bit worn but the middle and inner are good to run - $350 shipped http://p1.bikepics.com/pics/2009%5C07%5C30...740740-full.jpg http://p1.bikepics.com/pics/2009%5C07%5C30...740743-full.jpg Direct Drive lockout and old school polished Tyson cover- $210 shipped http://p1.bikepics.com/pics/2009%5C08%5C10...751405-full.jpg http://p1.bikepics.com/pics/2009%5C08%5C10...751406-full.jpg Quote
Rollinn Posted November 4, 2009 Report Posted November 4, 2009 Hey bro do you know if Rudy Kurtz Of Port Magic is still in business? I looked at his website but its down.. Do you happen to have a phone # by chance? Thx alot Port Magic (Rudy Kurtz) drag ported 10 mill T-rex cylinders fresh resleeve 75mm bore not ran since, t-rex coolhead with domes,brand new base gasket and coolhead o-ring kit,my 76.5 pistons for future needs,v-force reeds & intakes,powervalve block offs....you will need to get pistons for the new 75 bore. $1000 shipped plus paypal fees. Costed me almsot 7 to resleeve it and i payed well over that when i bought them... Oh these are capable up to a 78 bore now i was told <a href="http://p1.bikepics.com/pics/2009%5C07%5C30%5Cbikepics-1740752-full.jpg" target="_blank">http://p1.bikepics.com/pics/2009%5C07%5C30...740752-full.jpg</a> <a href="http://p1.bikepics.com/pics/2009%5C07%5C30%5Cbikepics-1740752-full.jpg" target="_blank">http://p1.bikepics.com/pics/2009%5C07%5C30...740752-full.jpg</a> <a href="http://p1.bikepics.com/pics/2009%5C07%5C30%5Cbikepics-1740758-full.jpg" target="_blank">http://p1.bikepics.com/pics/2009%5C07%5C30...740758-full.jpg</a> <a href="http://p1.bikepics.com/pics/2009%5C07%5C30%5Cbikepics-1740760-full.jpg" target="_blank">http://p1.bikepics.com/pics/2009%5C07%5C30...740760-full.jpg</a> <a href="http://p1.bikepics.com/pics/2009%5C07%5C30%5Cbikepics-1740771-full.jpg" target="_blank">http://p1.bikepics.com/pics/2009%5C07%5C30...740771-full.jpg</a> 39 pwk snomo alky carbs set up by Tyson with 14" filters & powerjets- $325 shipped...I also have a pump for another 20.Ran these half a season since converted.the carb caps and slides/needles are included just not pictured <a href="http://p1.bikepics.com/pics/2009%5C07%5C30%5Cbikepics-1740750-full.jpg" target="_blank">http://p1.bikepics.com/pics/2009%5C07%5C30...740750-full.jpg</a> Raw Big Bore Big Flange hand coned 2 out the right side Shearer pipes...bad azzzz pipes...I have both bolt on silencers and stingers for them.Currently for o-ringed cylinders- $450 shipped <a href="http://p1.bikepics.com/pics/2009%5C07%5C30%5Cbikepics-1740745-full.jpg" target="_blank">http://p1.bikepics.com/pics/2009%5C07%5C30...740745-full.jpg</a> <a href="http://p1.bikepics.com/pics/2009%5C07%5C30%5Cbikepics-1740748-full.jpg" target="_blank">http://p1.bikepics.com/pics/2009%5C07%5C30...740748-full.jpg</a> LSR aluminum drag axle with all banshee hubs.The outside splines are a bit worn but the middle and inner are good to run - $350 shipped <a href="http://p1.bikepics.com/pics/2009%5C07%5C30%5Cbikepics-1740740-full.jpg" target="_blank">http://p1.bikepics.com/pics/2009%5C07%5C30...740740-full.jpg</a> <a href="http://p1.bikepics.com/pics/2009%5C07%5C30%5Cbikepics-1740743-full.jpg" target="_blank">http://p1.bikepics.com/pics/2009%5C07%5C30...740743-full.jpg</a> Direct Drive lockout and old school polished Tyson cover- $210 shipped <a href="http://p1.bikepics.com/pics/2009%5C08%5C10%5Cbikepics-1751405-full.jpg" target="_blank">http://p1.bikepics.com/pics/2009%5C08%5C10...751405-full.jpg</a> <a href="http://p1.bikepics.com/pics/2009%5C08%5C10%5Cbikepics-1751406-full.jpg" target="_blank">http://p1.bikepics.com/pics/2009%5C08%5C10...751406-full.jpg</a> Quote
tundish2800 Posted November 4, 2009 Report Posted November 4, 2009 what do you want for just the lock up no cover Quote
badassbanshee479 Posted November 4, 2009 Report Posted November 4, 2009 the pics are not working.. um thats because this was posted like three months ago..... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.