main gear/bearing removal

[old roost]

Ok got the main gear off, thanks for the advice, i wasnt sure if i should tap on it or not being i have never worked on a banshee before. Now that i have the gear off i cant get the right side bearing off. i t should just slide off correct???? It spins very freely if you give it a flick of your finger it will spin at least 10-15 times all the way around.but it does sound slightly noisy so i think i should replace it in stead of lubing it up.

 

also painted case black, came out really nice, i used 1200 degree high temp paint, started stripping paint and surface rust from the frame, started painting that red,

Edited August 3, 2009 by old roost

[T_Shee]

that bearing is pressed onto the crank. if you wanna replace it i would take it somewhere and have them do it or just replace the crank

[old roost]

that bearing is pressed onto the crank. if you wanna replace it i would take it somewhere and have them do it or just replace the crank

 

 

 

that is what i was afraid of!!!! Ok so if i order a new crank does it come already together with new rods etc?

Good place to get one? or would i be ok with the ones that are on it for a while? Like i said they both spin very very freely

 

[zach45]

that is what i was afraid of!!!! Ok so if i order a new crank does it come already together with new rods etc?

Good place to get one? or would i be ok with the ones that are on it for a while? Like i said they both spin very very freely

yes they come with them together....

call john at rjatv.com tell him zach sent you and he give you a good deal

[old roost]

yes they come with them together....

call john at rjatv.com tell him zach sent you and he give you a good deal

 

thanks zach.......

by the way i was a fellow New Yorker! transplanted to texas.