Havok248 Posted July 29, 2009 Report Posted July 29, 2009 my banshee stalls on idle. When i took the cover off the thumb control and i noticed it is only when the switch inside the control is pushed in, if i move the throttle only slightly ( not enough to rev it only enough to move the switch) it idles like a champ... What is the switch and why is it causing me to stall? Quote
slopoke Posted July 29, 2009 Report Posted July 29, 2009 unhook the tors under the tank. two sets of wires going to each carb. that ought to fix it. Quote
Havok248 Posted July 29, 2009 Author Report Posted July 29, 2009 So i can unhook them without consequence? What are they supposed to do? Quote
Havok248 Posted July 29, 2009 Author Report Posted July 29, 2009 unhook the tors under the tank. two sets of wires going to each carb. that ought to fix it. I disconnected what i thought was tors and it wouldnt start, when i hooked it up everything was fine... But i verified when the switch is hit the engine is killed.. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.