350scabarat Posted July 27, 2009 Report Posted July 27, 2009 I jst bought a bashee. . . Thing is amazing! Only problem is when i rev it up and let the revs come to idle again it dies? But if i start it itl idle fine. Only when it comes down. . .if it wants to die and i touch the throtle abit itl idle then. Bt if i leave it it dies. .i hav 30pilots nd 270mains. Fmf fatty's , boysen reeds and a pro flow filter. . Ive cleaned the carbs out twice and my tors is disconected. . Help any1? Quote
okbeast Posted July 27, 2009 Report Posted July 27, 2009 Try a smaller pilot jet, 27.5 or a stock 25. Since the jets are that big I'd guess it's ported, but I ran 25 pilots with my stock carbs ported. Quote
350scabarat Posted July 27, 2009 Author Report Posted July 27, 2009 Na its standard porting, . .u think its to rich? Would that cause it to die? Cause it does idle but if it comes down from high revs it dies Quote
okbeast Posted July 27, 2009 Report Posted July 27, 2009 Yes that jetting is way too high for no porting. I'm not sure what hte main should be with just pipes and no porting but I'd say a 25 pilot and somethin like 250 main? Quote
350scabarat Posted July 28, 2009 Author Report Posted July 28, 2009 Well the topend is perfect. . .it has a dyno jet kit in. And the box i got the jets in sais that there jet numbers are alot biger than the stock numbers. . So i probably got 250s in. . .thanx man Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.