captainhowdie Posted July 14, 2009 Report Posted July 14, 2009 I used the search function but couldnt find what i was after, I just got done installing an overide and a 4 mill crank and i need to know that the torque specs on the cases are. i need specs for the top 10mm bolts and the bottom 13 mm nuts and the patterns there surposed to be torqued in. If anyone knows off hand can you please help? Thanks! Quote
bassmaster345 Posted July 15, 2009 Report Posted July 15, 2009 Upper case-7.4 ft.-lbs Lower case-18 ft.-lbs Not sure how to explain the sequence but it starts with the bottom starting in the center 4 then working to the outer 4 , then on the upper bolts they should be marked on the case at least mine were. Maybe someone has a picture to help explain it better. Quote
captainhowdie Posted July 15, 2009 Author Report Posted July 15, 2009 Thanks bro! hopefully someone will chime in with a pic. Quote
SAVAGE420 Posted July 15, 2009 Report Posted July 15, 2009 Thanks bro! hopefully someone will chime in with a pic. Here is a pic i took from my clymers man. Quote
moneybags Posted July 15, 2009 Report Posted July 15, 2009 Torqu sequence is stamped on the cases. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.