rocketrl Posted July 1, 2009 Report Posted July 1, 2009 hi, all, i'm new to banshees but i've built 4 or 5 rz350's which basically have the same engines. anyhow, this motor has a new crank, pistons, etc. before it was rebuilt, it had toomy t5 pipes, port and polish, and the jetting to match. my problem is it wont rev past idle. it idles smooth and normal, carbs are set and clean, new lines. what am i missing? and what is tors? any help is apreciated. Quote
tundish2800 Posted July 1, 2009 Report Posted July 1, 2009 unplug the tors and check the parking brake does the same thing. Quote
rocketrl Posted July 1, 2009 Author Report Posted July 1, 2009 unplug the tors and check the parking brake does the same thing. I just checked and the tors is already unpluged, and it doesnt have a parking brake. Quote
lowbuckracing Posted July 1, 2009 Report Posted July 1, 2009 main jets clogged,flywheel pickup gap needs to be adjusted,air leak somewhere... Quote
rocketrl Posted July 1, 2009 Author Report Posted July 1, 2009 found the problem, park brake switch was still hooked up under the tank. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.