Drewski Posted June 29, 2009 Report Posted June 29, 2009 my front sprocket shaft seal is leaking ,just wondering if I can change it without splitting the case. thanks in advance. Quote
XxMeltIcexX Posted June 29, 2009 Report Posted June 29, 2009 I havn't done it, but I believe you can, there is no nipple on the seal. Quote
blu01shee Posted June 29, 2009 Report Posted June 29, 2009 Yes you can do it without spliting it just did mine three weeks ago Quote
AKheathen Posted June 29, 2009 Report Posted June 29, 2009 check the play in the bearing. if it's good, just pry the old one out, without damaging the case, and replace. Quote
VegasJeff Posted June 29, 2009 Report Posted June 29, 2009 check the play in the bearing. if it's good, just pry the old one out, without damaging the case, and replace. When you take off the sprocket nut ,remove the collar that goes over the output shaft and pry out the seal gently. :thumbsup: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.