Wassup350 Posted June 21, 2009 Report Posted June 21, 2009 I have an 87 banshee and the throttle sticks when ever i ride in wet conditions. My old banshee did the same thing. Does anyone know a fix for this? I am almost thinking maybe it needs longer vent tubes. Quote
ohiobanshee Posted June 21, 2009 Report Posted June 21, 2009 Most likely it's the carb top seal,under the cap you screw on top of the carbs. Quote
#1JUANstunna Posted June 21, 2009 Report Posted June 21, 2009 Lube your cable. Mine did the same thing, someone had taken out the tors switch and the throttle limiting screw in the thumb housing and was letting water in. Check for holes and lube that sucker up. Quote
Wassup350 Posted June 22, 2009 Author Report Posted June 22, 2009 Lube your cable. Mine did the same thing, someone had taken out the tors switch and the throttle limiting screw in the thumb housing and was letting water in. Check for holes and lube that sucker up. Sounds good. Quote
Wassup350 Posted June 22, 2009 Author Report Posted June 22, 2009 wow it seems there are a lot more members judging by your member numbers. I havent posted on here since i got rid of my old banshee. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.