papa-smurf Posted June 13, 2009 Report Share Posted June 13, 2009 hey guys, i just bought a banshee and i was trying to remove my front plastics and the two bolts to the gas tank will spin but will not come out, assuming the threads are stripped and what not. What can I do get these bolts out with the least amount of damage? Any one have this problem before? Quote Link to comment Share on other sites More sharing options...
Ineedmoney Posted June 13, 2009 Report Share Posted June 13, 2009 take som pliers and jsut pull hard and twist. drill it out take a flat head and take it out use ur imagination. Quote Link to comment Share on other sites More sharing options...
papa-smurf Posted June 13, 2009 Author Report Share Posted June 13, 2009 i tried the pliers, pulled really hard and twisted, same thing..just spins..how do u recommend drilling it out without damaging the tank? Quote Link to comment Share on other sites More sharing options...
Ineedmoney Posted June 13, 2009 Report Share Posted June 13, 2009 i would get a super samll drill bit, idk i would have ot be in the situation. Quote Link to comment Share on other sites More sharing options...
papa-smurf Posted June 13, 2009 Author Report Share Posted June 13, 2009 ya ok man, thx Quote Link to comment Share on other sites More sharing options...
swrbansheeboy Posted June 13, 2009 Report Share Posted June 13, 2009 this should give you some ideas... http://www.bansheehq.com/forums/index.php?showtopic=26260 Quote Link to comment Share on other sites More sharing options...
extreem9 Posted June 15, 2009 Report Share Posted June 15, 2009 Try an impact gun Quote Link to comment Share on other sites More sharing options...
Meat Posted June 15, 2009 Report Share Posted June 15, 2009 There's a hellava lot of banshee owners who have this problem. I always liked Holymans fix. ya just melt out the old insert and epoxy a new insert back in. And anyone reading this who hasn't had a problem with these two gas tank bolts, I suggest you pull the bolts carefully and apply anti-seize to the threads. Don't ever loc-tite these gas tank bolts. good luck papa smurf, your just going to have to get er done. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.