tranny problem

[hpwdhatch]

i'm assembling my motor back together on my banshee and after i install the transmission I perform a transmission shifting check. my problem is when i try shifting it only goes to 3rd gear. when i take the mainshaft and countershaft out it shifts fine. i've tried the adjustments on the adjustment bolts but still no luck.

[ohiobanshee]

Turn the output shaft while you are trying to shift.Without a little movement it will not shift through all the gears.

[hpwdhatch]

Turn the output shaft while you are trying to shift.Without a little movement it will not shift through all the gears.

by you saying output shaft do you mean the external shaft???

[Larry's Shee]

Shaft that chain sprocket goes on. Parts need to be rotating to move/shift properly/easily.

[hpwdhatch]

Shaft that chain sprocket goes on. Parts need to be rotating to move/shift properly/easily.

cool thanks

 

 

[hpwdhatch]

i'm assembling my motor back together on my banshee and after i install the transmission I perform a transmission shifting check. my problem is when i try shifting it only goes to 3rd gear. when i take the mainshaft and countershaft out it shifts fine. i've tried the adjustments on the adjustment bolts but still no luck.

for some reason i cannot get the mesh right on the tranny, sometimes I get it and it shifts thru all the gears but after a couple times of me shifting the gears they get stuck again.