Ineedmoney Posted June 6, 2009 Report Posted June 6, 2009 Give me starting point to start out at when rejetting for my mods in my sig i havent started it yet , still 200 mains and 25 pilot, Quote
Wildcardracing Posted June 6, 2009 Report Posted June 6, 2009 I'd start with 310 mains, 27.5 pilots, needle in the middle clip and 2 turns out on the air screws. Work from there with a good plug chop. Quote
AKheathen Posted June 6, 2009 Report Posted June 6, 2009 I'd start with 310 mains, 27.5 pilots, needle in the middle clip and 2 turns out on the air screws. Work from there with a good plug chop. with a lid/snorkel? Quote
Ineedmoney Posted June 9, 2009 Author Report Posted June 9, 2009 im not going to do a snorkel, but does that sound right. Also what is the regular compression for a stock banshee. 120 right. how low should it be before i get a full top end rebuild done. I put my t-5s on today so i need to know if this guys sounds somewhere in a close range of what im suppose to use. Also this si a stupid question. but when jetting. (remember this is my first time) U jet both carbs. so i need to buy two jets and two mains. Sry im a newb when it comes to engines, thats why i got the clymers. (but dont feel lie reading.) Quote
Ineedmoney Posted June 9, 2009 Author Report Posted June 9, 2009 oh yeah and the temp's are gonna range from 70-90. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.