Give me a starting point at 626 feet above sea level

[Ineedmoney]

Give me starting point to start out at when rejetting for my mods in my sig

 

i havent started it yet , still 200 mains and 25 pilot,

[Wildcardracing]

I'd start with 310 mains, 27.5 pilots, needle in the middle clip and 2 turns out on the air screws. Work from there with a good plug chop.

[AKheathen]

I'd start with 310 mains, 27.5 pilots, needle in the middle clip and 2 turns out on the air screws. Work from there with a good plug chop.

with a lid/snorkel?

[Ineedmoney]

im not going to do a snorkel, but does that sound right.

Also what is the regular compression for a stock banshee. 120 right.

how low should it be before i get a full top end rebuild done.

 

 

I put my t-5s on today so i need to know if this guys sounds somewhere in a close range of what im suppose to use.

 

Also this si a stupid question. but when jetting. (remember this is my first time) U jet both carbs. so i need to buy two jets and two mains.

 

Sry im a newb when it comes to engines, thats why i got the clymers. (but dont feel lie reading.)

[Ineedmoney]

oh yeah and the temp's are gonna range from 70-90.