sir_247 Posted May 21, 2009 Report Posted May 21, 2009 well after i put the motor back into my shee i turned it on and i had put the needles wrong and was at full blast after that i put the needles in the proper position and my shee ended up with gunked up carb so i pulled them and got the jets and the main mixed up my question is are they the same or is on bigger or smaller thanks for the help Quote
GrMeyer Posted May 21, 2009 Report Posted May 21, 2009 What? the mains should be the same in both sides...and the pilots are smaller and require a flat head to get out... and they are the same for both sides... about 3/4's down the page is pics of where everything goes http://www.dfn.com/benkaren/jetfaq.html Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.