HJR 4 mil MX ported cylinders.

[BlntdEyez]

I had a deal on this but it fell though. So I am listing them again. asking 550 shipped to the lower U.S. Full transfer port work up. They are on a 64.50 mm bore and come with new wiseco 795 pistons, circlips, rings, wrist pin and wrist pin bearings.

 

 

 

[wacko2000]

Has this setup been ran?

thanks

[BlntdEyez]

Has this setup been ran?

thanks

 

nope never

[BlntdEyez]

nope never

 

 

Bump

 

[97stageIVBansh]

will these work on a stock crank and stock head? what else would i need, my bike has stock carbs, pods and trinity pipes

[donkeypuncher]

will these work on a stock crank and stock head? what else would i need, my bike has stock carbs, pods and trinity pipes

 

 

you will need a 4 mill crank to run these cylinders. the stock head can work but needs to be cut for the 4mill. stock carbs will work but bigger will be better and wont choke back performance as much.

[97stageIVBansh]

ha well i guess im out then

[BlntdEyez]

Bump

[BlntdEyez]

TTT

[BlntdEyez]

Bump 500 shipped with pistons, ring, wrist pin, wrist pin bearings,and circlips to the lower U.S.

[BlntdEyez]

SOLD