Trinity Head

[Loc]

I am puttig a Trinity stage IV head on my Banshee and have a couple guick questions

 

-What are the torque specs for this head and what order do you torque them in.

-What type of jetting changes will I have to make

-Is this a good head and will I notice a pretty decent performance increase

 

Thanks

 

[Loc]

anyone

[KlotzBanshee]

Not exactly sure of the torque on Trinity heads, but on most heads you go 5ft-lbs at a time up to 20ft-lbs. Torque in the order of the numbers on the stock head 1-10.

 

The performance you'll see depends on the size of domes you put in the head and the other mods you may have to compliment it.

 

With just a head change, in most cases you will not need to rejet but keep an eye on your plugs and do a plug chop when you think the jetting is close.

[Loc]

My mods are pretty mild and the domes will be 18cc. I am hoping to make about 165 for my compression. I will be running 110 fuel.

FMF fatties

timing at +4

KN pod filters