ban06shee Posted April 18, 2009 Report Posted April 18, 2009 can anyone help me out, my throttle is sticking and when i move the handle bars it revs up, its pretty damn dangerous because it usually sticks on full throttle too when im drag racing. i believe the throttle cable is new because i got the T.O.R.S. removal kit and i dont think my slides in my carbs are dirty because it just got jetted hella times putting my cool heads on so they were on and off many times. anyone have any ideas what it could be or what i should do to get rid of this problem? thanks guys appreciate the help Quote
#1JUANstunna Posted April 18, 2009 Report Posted April 18, 2009 (edited) Take the cable off at the thumb and make sure it is routed the right way under the tank and behind the radiator. Edited April 18, 2009 by yamahaman126 Quote
smokeisgood Posted April 18, 2009 Report Posted April 18, 2009 my pit bike did that it was bunching up or cable would come out of collar bracket trace it maybe put it in a diffrent position that is scary!!! Quote
Willie the wimp Posted April 18, 2009 Report Posted April 18, 2009 Perhaps the cable needs to be lubed? Quote
ban06shee Posted April 18, 2009 Author Report Posted April 18, 2009 Take the cable off at the thumb and make sure it is routed the right way under the tank and behind the radiator. everything seems to be were it should...? anything else it could be? Quote
ban06shee Posted April 18, 2009 Author Report Posted April 18, 2009 Perhaps the cable needs to be lubed? i already tried that, i went and bought that cable luber tool and some lube. nothing? the cables only been on a couple weeks. and ive only rode it a few times. Quote
ban06shee Posted April 18, 2009 Author Report Posted April 18, 2009 (edited) my pit bike did that it was bunching up or cable would come out of collar bracket trace it maybe put it in a diffrent position that is scary!!! hell yeah it is, its bad enough i gotta hold on, no i gotta hope it dont get stuck in full throttle lol unless the cruise control's not working! :biggrin: Edited April 18, 2009 by ban06shee Quote
smokeisgood Posted April 18, 2009 Report Posted April 18, 2009 lean back turn the bars till throttle is 100% oem cruize control can I get that on ebay lol!!! Quote
ban06shee Posted April 18, 2009 Author Report Posted April 18, 2009 lean back turn the bars till throttle is 100% oem cruize control can I get that on ebay lol!!! lmmfao! think i seen one on craigslist Quote
swrbansheeboy Posted April 18, 2009 Report Posted April 18, 2009 either the cables routed wrong or you have the wrong cable installed.. your hanging throttle problem might be caused by a bad cable but if turning the bars is causing the bike to throttle up you either have a clearance issue causing the cable to pull or your cable is too short causing it to pull... any way you slice it i'd recomend purchasing a new cable and making sure it's routed correctly.... Quote
ban06shee Posted April 18, 2009 Author Report Posted April 18, 2009 either the cables routed wrong or you have the wrong cable installed.. your hanging throttle problem might be caused by a bad cable but if turning the bars is causing the bike to throttle up you either have a clearance issue causing the cable to pull or your cable is too short causing it to pull... any way you slice it i'd recomend purchasing a new cable and making sure it's routed correctly.... sounds good, i think im just going to do that, know of a good cable? i found a stainless steel one or something like that? any specific cable i should by or are they all the same? thanks Quote
swrbansheeboy Posted April 19, 2009 Report Posted April 19, 2009 i try to stick with motion pro cables.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.