lt1bird Posted April 8, 2009 Report Share Posted April 8, 2009 I have been running the engine more(2nd time running), is it normal to get smoke out of the powervalve vent tube? For some reason I thought these were vented just inside the top cap and it just controlled how fast the PV would open/close....Thought it was sealed better. Seems much more smoke on one side....maybe it will go away when all the oil burns out from inside the case as i did lube the crank up alot with twostroke oil?? Quote Link to comment Share on other sites More sharing options...
lt1bird Posted April 9, 2009 Author Report Share Posted April 9, 2009 come on guys....I know there are a bunch of you that have trinity power valve cyl...... Quote Link to comment Share on other sites More sharing options...
hercalmighty Posted April 9, 2009 Report Share Posted April 9, 2009 I dont know about the PV cylinders you have but on the YZ's Ive had with PV's you will get a little smoke and oil out of it but not much at all. I would maybe give it a little bit for the oil from building burns off. Quote Link to comment Share on other sites More sharing options...
lt1bird Posted April 11, 2009 Author Report Share Posted April 11, 2009 trinity power valve cyl's..... yes it seems to be getting better....less smoke, etc the more it runs.... It just suprised me....I thought it was all sealed up inside....thought it was purely an air vent for the rubber diaphram inside...Obviouly there is no diaphram LOL... Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.