trailrider Posted March 27, 2009 Report Posted March 27, 2009 crunk the 4mil cheetah stroker for the first time, any pointers on how to break it in as what should i set the timing on and oil/fuel ratio Quote
trailrider Posted March 27, 2009 Author Report Posted March 27, 2009 crunk the 4mil cheetah stroker for the first time, any pointers on how to break it in as what should i set the timing on and oil/fuel ratio and it sounds like a beast, but i do not know what to set tje timing on for break in, or does it matters Quote
sandman81 Posted March 27, 2009 Report Posted March 27, 2009 (edited) I run my timing at +5, and oil/fuel 32:1. Some use 40:1 but better use good oil like Klotz or Maxima Castor 927 if your gonna run it at that ratio. break in is simple, make sure your jets are right. 5-10 mins of idle. 10-15 mins to cool. check the head bolts 5-10 mins of idle. 10-15 mins to cool. check the head bolts 15-20 minute of easy riding. cool down. check the head bolt then you could run it hard. Edited March 27, 2009 by sandman81 Quote
trailrider Posted March 27, 2009 Author Report Posted March 27, 2009 I run my timing at +5, and oil/fuel 32:1. Some use 40:1 but better use good oil like Klotz or Maxima Castor 927 if your gonna run it at that ratio. break in is simple, make sure your jets are right. 5-10 mins of idle. 10-15 mins to cool. check the head bolts 5-10 mins of idle. 10-15 mins to cool. check the head bolts 15-20 minute of easy riding. cool down. check the head bolt then you could run it hard. sounds good, thanks sandman, i set the timing a +3 but i think i would take it up Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.