dam bike

[nayr742003]

Ok I let my bike sit for a few weeks waiting on some parts. I got the parts in today and for some reason the left side isnt firing and when i checked the plug it had oil on it. So what would cause this? Be fore all of this the bike ran fine just had a jettein issue and nnede a new throttel cabel

[peterlocal22]

how long has it been since your bike ran?

[nayr742003]

just 2 weeks

[Profilact]

Ok I let my bike sit for a few weeks waiting on some parts. I got the parts in today and for some reason the left side isnt firing and when i checked the plug it had oil on it. So what would cause this? Be fore all of this the bike ran fine just had a jettein issue and nnede a new throttel cabel

 

 

Have you tried anything or did you just come on here and hope someone would sprinkle pixie dust on it?

 

Check your plug wire and cap.

[vulvafan537240]

Have you tried anything or did you just come on here and hope someone would sprinkle pixie dust on it?

 

Check your plug wire and cap.

[nayr742003]

I checked a few things didnt do a compression test yet havent ben back to the grage to do so. I did the leak down test when and after the build. I think im going to half to tear it down again and check everything out.

[Coupelx]

i myself might try a new set of plugs and let it run for a bit to make sure any fuel and oil setting in the crankcase is out. seems like everyones thinking now days is just tear it apart and throw money at it.

 

 

[nayr742003]

If the rings are bad or didnt seat right would they let oil into the cylinders i did put new plugs into it and it did the same thing. I pulled the plug out and it was oil soaked again.