Mickz30 Posted March 23, 2009 Report Posted March 23, 2009 OK bought my banshee an it was prepared for supermoto racing. I wanted to leave her ready for motocross,so i bought 2 front shocks an a rear shock. Put them in an realised the back of the quad was still far too low. I then measured my swingarm an its 16 or 17 inches from bolt to bolt roughly. I think that this is the problem(the swingarm) Is this a shortened swingarm or what. I am running out off patience so please Help Me Thanks for your help guys its very much appreciated Quote
Mickz30 Posted March 23, 2009 Author Report Posted March 23, 2009 What size is a stock swingarm,i measured my swingarm an its 16-17 inches from axle center to the pivot bolt. is this a shortend or lenghened swingarm? What size of a swingarm would i need for motocross an a bit of off trail riding? And if it was a longer swingarm would this be why the shee sits like a chopper lol Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.