Jump to content

HELP Suspension Problem


Recommended Posts

OK bought my banshee an it was prepared for supermoto racing.

I wanted to leave her ready for motocross,so i bought 2 front shocks an a rear shock.

Put them in an realised the back of the quad was still far too low.

I then measured my swingarm an its 16 or 17 inches from bolt to bolt roughly.

I think that this is the problem(the swingarm)

Is this a shortened swingarm or what.

I am running out off patience so please Help Me

 

Thanks for your help guys its very much appreciated

Link to comment
Share on other sites

not sure what your bolt to bolt is but if it is shortened it would only make it better for tt or mx... but i think stock is 14in from pivot bolt to center of axle... but not positive

 

My bolt to bolt is centre of axle to the pivot bolt as u said,but the shee still sits very low at the back,why would this be?

I have a stock rear shock an yfz450 shocks in the front

When i sit on her its like sitting on a chopper lol she just sinks at the rear!!!Why???????

Is this to do with the swinger

Link to comment
Share on other sites

got any pics?? is your shock any good??? it might have lowering link or something for tt racing on it ..

 

 

Now that u mention that about a lowering link,my dogbone link sits really really low to the ground.

Can u buy lowering dogbone links?

Maybe this is my problem,mine sits roughly 2-3 inches from the ground when i sit on the shee?

 

Many thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...