quad4914 Posted March 13, 2009 Report Posted March 13, 2009 Hi I need to get some swapping done. I have a good used welded crank, stock stroke & rod, I would like to swap for a good used set of vforce 2's. I could even send my my old boysens & cages if that helps. I would also swap the crank for a good j-arm frame if your in utah. The crank was pulled cause I cooked a piston, so had a good excuse to go to a 4mm. Seems nice & tight. I cleaned it up with solvent , wd-40 , & a little snap-on air tool oil to keep the bearings lubed. I also want to change my carbs to keihins after cooking the pistons, I need less jet choices. They're 33mm or 34mm round slide mikunis that ran great all summer but when I fired it up to go riding in the snow in 30 degree december weather the jetting was off. DOH. Any way I have these mikunis & a set of stock ones with tors and a 2 into 1 airfilter that I'd swap for a set of 33mm - 35mm keihin flatslides. The slides aren't pictured but I have them on the bike as I will retry'em if no one wants'em. I'd also want to keep the pods if the keihins dont come with pods. Boost bottles ... I have 2 I'd trade for a stock crossover tube. They have a little wearfrom the cable riding on top but all in all their good. Any questions just ask. I hope I dont regret this but you can just call if its easier 435-896-1995. And as for feedback I dont have any on this site but my ebay id is 81cr450 Quote
BansheeRider87 Posted March 13, 2009 Report Posted March 13, 2009 Hi I need to get some swapping done. I have a good used welded crank, stock stroke & rod, I would like to swap for a good used set of vforce 2's. I could even send my my old boysens & cages if that helps. I would also swap the crank for a good j-arm frame if your in utah. The crank was pulled cause I cooked a piston, so had a good excuse to go to a 4mm. Seems nice & tight. I cleaned it up with solvent , wd-40 , & a little snap-on air tool oil to keep the bearings lubed. I also want to change my carbs to keihins after cooking the pistons, I need less jet choices. They're 33mm or 34mm round slide mikunis that ran great all summer but when I fired it up to go riding in the snow in 30 degree december weather the jetting was off. DOH. Any way I have these mikunis & a set of stock ones with tors and a 2 into 1 airfilter that I'd swap for a set of 33mm - 35mm keihin flatslides. The slides aren't pictured but I have them on the bike as I will retry'em if no one wants'em. I'd also want to keep the pods if the keihins dont come with pods. Boost bottles ... I have 2 I'd trade for a stock crossover tube. They have a little wearfrom the cable riding on top but all in all their good. Any questions just ask. I hope I dont regret this but you can just call if its easier 435-896-1995. And as for feedback I dont have any on this site but my ebay id is 81cr450 This is a mess man. Clean up this post so we can see what you want to sell or swap? I have no idea what im looking at and nor does others. Quote
quad4914 Posted March 16, 2009 Author Report Posted March 16, 2009 The crank & boost bottles have been swapped. I still have the carbs, if anyone wants a set of stock carbs & set of 33-34mm mikunis for a single set of keihin 33-35mm flatslides I'd be happy to trade. Would work good for someone wanting to go back to stock & still have another set you could make a couple bucks off. Quote
quad4914 Posted March 20, 2009 Author Report Posted March 20, 2009 I think I found some carbs. So these are up for sale. $150 with pods shipped for the 33-34 mikunies. $40 shipped for the stock carbs & 2 into one filter. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.