1996dragshee Posted March 9, 2009 Report Posted March 9, 2009 alright guys i ran into a big prob and i gotta get rid of the top end now.There is nothing wrong with it at all.oh except im missing one dome o-ring. 70 mm bore no scratches or gouges,clean and smooth and walls are still thick, ported for 4mill.I was told Tyson ported it.Comes with Trinity blaster pistons,wrist pins, and a set of 27 cc domes and a brand new set of 25cc domes just cut i havnt even run yet.This set up on a 4mill crank makes 446cc..A few others can vouch for me this set up runs hard.This is a mount and run set up i have all the bolts acorn nuts etc... i need 550 shipped for the whole top end! i will get more pics of the transfers and intakes later when i tear it down scroll down to post 29 http://www.bansheehq.com/forums/index.php?...15&start=15 Quote
Darthwall Posted March 9, 2009 Report Posted March 9, 2009 do you have to machine the cases to run this setup? Quote
Mofo69 Posted March 9, 2009 Report Posted March 9, 2009 Send me pic's, very interested [email protected] Put me 1st in line, pending pics Quote
badassbanshee479 Posted March 9, 2009 Report Posted March 9, 2009 bump for a great guy and a good running setup.... Quote
1996dragshee Posted March 9, 2009 Author Report Posted March 9, 2009 No machining to the cases unless you want to port them. Sale is pending already.If it falls through mofo69 you are next in line. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.