1987shee Posted February 10, 2009 Report Posted February 10, 2009 ok, so i tore down my shee a little while back because it wasnt sparking at all after replacing cdi, coil and checking my wires so i toyed around with it pulled my cylinders off they look clean no scratches or anything! first time they were off sense 1988 lol it sat forever. but i leak oil from my case because theres a lil crack in it, where should i go from here guys weld the case and just put it back together? not many mods just bolt ons. Quote
uwenr Posted February 10, 2009 Report Posted February 10, 2009 ok, so i tore down my shee a little while back because it wasnt sparking at all after replacing cdi, coil and checking my wires so i toyed around with it pulled my cylinders off they look clean no scratches or anything! first time they were off sense 1988 lol it sat forever. but i leak oil from my case because theres a lil crack in it, where should i go from here guys weld the case and just put it back together? not many mods just bolt ons. Did you fix the spark problem? I would weld the cases, ive welded mine twice and its fine. Quote
1987shee Posted February 10, 2009 Author Report Posted February 10, 2009 Did you fix the spark problem? I would weld the cases, ive welded mine twice and its fine. no i didnt im still stumped on the electrical problem! im pretty sure i went threw all of my wiring harness and stator so im just going to get a new harness in case i missed something but i check my kill switch, harness, replaced cdi, replaced coil, check stator what else is there to checK? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.