Darthwall Posted February 10, 2009 Report Posted February 10, 2009 got a good deal on some CPI OOF drag pipes but no brackets so I either have to make some or buy some lets see some examples of what people are using Quote
Wildcardracing Posted February 10, 2009 Report Posted February 10, 2009 It's a build your own application. I use 1.5" x3/16" aluminum strap to build them. Make sure to put a bushing between the footpeg and your mount so the vibration doesn't break your pipes. Quote
Darthwall Posted February 10, 2009 Author Report Posted February 10, 2009 It's a build your own application. I use 1.5" x3/16" aluminum strap to build them. Make sure to put a bushing between the footpeg and your mount so the vibration doesn't break your pipes. ok thats kinda what I thought what about the front mounts Quote
uwenr Posted February 10, 2009 Report Posted February 10, 2009 got a good deal on some CPI OOF drag pipes but no brackets so I either have to make some or buy some lets see some examples of what people are using I use 1" steel strap on both of mine. Where we ride its kinda rough and the aluminum doesnt hold up. Quote
J-Madd Posted February 10, 2009 Report Posted February 10, 2009 ok thats kinda what I thought what about the front mounts Not sure front mounts are necessary. Shearers don't have front mounts. Quote
Wildcardracing Posted February 11, 2009 Report Posted February 11, 2009 I use loop clamps for the fron mounts, they work pretty good. But, I have seen people weld a bracket to the frame as well. Quote
Darthwall Posted February 12, 2009 Author Report Posted February 12, 2009 cool thanks everyone I got them mounted up today I just had to do a lil research before. Incase I screw something up dont want to break the tabs off the pipes as soon as I get them right Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.