sheething1127 Posted February 6, 2009 Report Posted February 6, 2009 ok i just reassebled my shee from a winter rebuild. i had the enitre motor apart and there are absoulty no fulids in it what soever, so my question is how much oil does it take? all i have to do is fill the lower end? no other fuilds right? and also how do i bleed the coolant? Quote
uwenr Posted February 6, 2009 Report Posted February 6, 2009 ok i just reassebled my shee from a winter rebuild. i had the enitre motor apart and there are absoulty no fulids in it what soever, so my question is how much oil does it take? all i have to do is fill the lower end? no other fuilds right? and also how do i bleed the coolant? if its stock i run a quart and a half. you dont have to bleed the coolant fill it up and run it then check if it had any air bubbles. Quote
2001Stroker Posted February 6, 2009 Report Posted February 6, 2009 1.6 quarts in the transmission. The coolant bleeds itself. Just keep an eye on the level in the radiator. Quote
Snopczynski Posted February 6, 2009 Report Posted February 6, 2009 1.6 quarts in the transmission. The coolant bleeds itself. Just keep an eye on the level in the radiator. Runt he bike after this, let sit 4 minutes and re-check the dipstick. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.