BlasterKX Posted February 5, 2009 Report Posted February 5, 2009 ok i just got it together and i ran it for a few seconds a couple times just to hear it. and tom il get the idle dialed in but was wondering where i should go from here on my jetting?? its a dune/play aggresive and i am running 300 mains 27.5 pilots and toomey needles set at the 3rd clip from the top. seemed to run a lil lean cuz id give it a lil gas (maybe 1/4 throttle) and it would kinda hang there for a couples seconds. but then again it could be everything setteling in. lmk what you guys think. o ya at 530 above thanks fellas Quote
'04limited Posted February 5, 2009 Report Posted February 5, 2009 i think you'll have to fatten it up some . but get in touch with whoever did your porting and they should be able to get you in the ball park. Quote
donkeypuncher Posted February 6, 2009 Report Posted February 6, 2009 i think you'll have to fatten it up some . but get in touch with whoever did your porting and they should be able to get you in the ball park. +1. builder knows best! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.