tony cub Posted January 14, 2009 Report Posted January 14, 2009 (edited) stock cylinders drag ported for a 4mill long rod by TDR w/pistons.slap on the right head and go.$400 obo plus ride Edited January 14, 2009 by tony cub Quote
Darthwall Posted January 15, 2009 Report Posted January 15, 2009 what size of bore are these on and what kind of port job do they have also If you have some pics that would be great too Quote
tony cub Posted January 15, 2009 Author Report Posted January 15, 2009 what size of bore are these on and what kind of port job do they have also If you have some pics that would be great too thay are on 65mm bore and they are drag ported.send me your email and ill send pics. Quote
sheerider1026 Posted January 18, 2009 Report Posted January 18, 2009 junk WOW!! now that there is childish.. i only say this because you guys had a little dispte on another thread, and now you are bashin on him trying to sell some cylinders.. Quote
sheerider1026 Posted January 18, 2009 Report Posted January 18, 2009 read my post above, here this will help http://www.bansheehq.com/forums/index.php?...15&start=15 Quote
bansheejoel Posted January 18, 2009 Report Posted January 18, 2009 WOW!! now that there is childish.. i only say this because you guys had a little dispte on another thread, and now you are bashin on him trying to sell some cylinders.. not that at all, were talking about the same tdr right? The one im talking about is based in flordia. My cousin ran jugs that came on his shee that tony ported and they ate rings like crazy. The damn intake bridge or w/e there called was so damn thin it looked like it was going to snap. Quote
xsinnerx Posted January 18, 2009 Report Posted January 18, 2009 read my post above, here this will help http://www.bansheehq.com/forums/index.php?...15&start=15 yeah I know about the squabble they had, I was just wanting him to explain why he considers them junk. Quote
tony cub Posted January 18, 2009 Author Report Posted January 18, 2009 junk sorry guys,bansheejoel didnt have his nap today... Quote
bansheejoel Posted January 18, 2009 Report Posted January 18, 2009 (edited) sorry guys,bansheejoel didnt have his nap today... good one, BTW read the rules about sellin shit. Must post pics of what your selling :thumbsup: Edited January 18, 2009 by bansheejoel Quote
tony cub Posted January 18, 2009 Author Report Posted January 18, 2009 good one, BTW read the rules about sellin shit. Must post pics of what your selling :thumbsup: your right..sorry guys will get pics up asap.. as far as tdr's porting,to me if i had to send someone to do it,it would be him.our little friend here just doesnt know how to install ring and takes it out on the guy that ported it...maybe you should take a class or read a book and then you wouldnt have to have someone do it. porting 101???they sell it on ebay Quote
bansheejoel Posted January 18, 2009 Report Posted January 18, 2009 (edited) your right..sorry guys will get pics up asap..as far as tdr's porting,to me if i had to send someone to do it,it would be him.our little friend here just doesnt know how to install ring and takes it out on the guy that ported it...maybe you should take a class or read a book and then you wouldnt have to have someone do it. porting 101???they sell it on ebay what the hell are you talking about? My sled engine? First off, they are NOT ported and second of all my rings were on the rite way jackass. I got a fucking bad batch of pistons from cat. They were 17 thousandths bigger at the bottom than at the top so i was having problems with clearance between the piston and cylinder. So before you know the story SHUT THE FUCK UP! BTW why the fuck would i buy a porting book on ebay to port nikcil cylinders that were almost $600 a piece? Once again, your a fucking idiot. Edited January 18, 2009 by bansheejoel Quote
tony cub Posted January 18, 2009 Author Report Posted January 18, 2009 what the hell are you talking about? My sled engine? First off, they are NOT ported and second of all my rings were on the rite way jackass. I got a fucking bad batch of pistons from cat. They were 17 thousandths bigger at the bottom than at the top so i was having problems with clearance between the piston and cylinder. So before you know the story SHUT THE FUCK UP! BTW why the fuck would i buy a porting book on ebay to port nikcil cylinders that were almost $600 a piece? Once again, your a fucking idiot. who the fuck is talking about a sled..asshole... Quote
bansheejoel Posted January 18, 2009 Report Posted January 18, 2009 (edited) who the fuck is talking about a sled..asshole... My bad, I thought you were talking about a engine i had. The tdr ported engine was put together by a local shop before my cousin bought it. It wasnt bad rings, or how they were installed that was the problem. On the intake side the bridge or w.e was so damn narrow it would groove the rings after maybe 20 hrs of riding time......asshole......your telling me to take a class or read a book on how to port but you have your jugs ported by TDR also so you dont have room to talk dumbass Edited January 18, 2009 by bansheejoel Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.