swhitey917 Posted January 12, 2009 Report Posted January 12, 2009 will yfz 450 a-arms bolt right up to a banshee or is there mods that have to be done. Quote
swhitey917 Posted January 12, 2009 Author Report Posted January 12, 2009 There is a Pin on this already there is a pin on yfz 450 shocks not on a-arms Quote
91tsiawd Posted January 12, 2009 Report Posted January 12, 2009 there is a pin on yfz 450 shocks not on a-arms http://www.bansheehq.com/forums/index.php?...t=0&start=0 Here is the write up on the 450 arms. If you don't already have a set of arms, let me know. I plan on selling my arms, that have already been cut and have the spacers (They are off of an 06 and have been powder coated). I also have a set of shocks as well that have been set up for 175lb rider on a Banshee. Quote
swhitey917 Posted January 12, 2009 Author Report Posted January 12, 2009 http://www.bansheehq.com/forums/index.php?...t=0&start=0 Here is the write up on the 450 arms. If you don't already have a set of arms, let me know. I plan on selling my arms, that have already been cut and have the spacers (They are off of an 06 and have been powder coated). I also have a set of shocks as well that have been set up for 175lb rider on a Banshee. do you have any pics and how much are you wanting for the stuff Quote
swhitey917 Posted January 12, 2009 Author Report Posted January 12, 2009 no, its impossible guess its not impossible Quote
flint Posted January 13, 2009 Report Posted January 13, 2009 That was sarcasm because this topic has been covered 1 billion time on hear! Quote
2 STROKIN' Posted January 13, 2009 Report Posted January 13, 2009 http://www.bansheehq.com/forums/index.php?...t=0&start=0 Here is the write up on the 450 arms. If you don't already have a set of arms, let me know. I plan on selling my arms, that have already been cut and have the spacers (They are off of an 06 and have been powder coated). I also have a set of shocks as well that have been set up for 175lb rider on a Banshee. Pics & price?? Quote
1stwarrior95 Posted January 13, 2009 Report Posted January 13, 2009 I just read part of the conversion thread. Got tired of reading...LOL I didn't see any mention of mods for the top a-arms. Do they just bolt on or is there mods involved? Quote
decon Posted January 13, 2009 Report Posted January 13, 2009 (edited) The top a-arms bolt directly on, be sure to use your end caps from your stock a-arms because they fit a little loose without them. I do have the spacer kit mentioned in the thread. It cost me $100 shipped, including longer tie rods. I think its only $50 bucks if you dont need tie rods. The pictures are in that thread of the spacers installed. You do have to modify the lower a-arms, requires a little cutting not too bad. It is definetly worth it. I spend about $500 bucks for a full front end setup, Including the 450 a-arms, spacers, tie rods, and shocks. I run works tripple rate 400EX shocks with my 450 a-arms because they are longer. Edited January 13, 2009 by dEcon Quote
91tsiawd Posted January 13, 2009 Report Posted January 13, 2009 I just read part of the conversion thread. Got tired of reading...LOL I didn't see any mention of mods for the top a-arms. Do they just bolt on or is there mods involved? The uppers bolt right up, no need to modify anything. Quote
Banshee_Bandit Posted January 13, 2009 Report Posted January 13, 2009 If those A-Arms were mounted already on a Shee then theoratically there will be no fitting required for the new owner neither on them upper nor the lower ones Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.