thehillsiderider Posted January 10, 2009 Report Share Posted January 10, 2009 So after a full tear down of my engine i found alot of scourched bearing and shafts and pinion gears which led to my locking up of tranny.Replaced almost every gear in tranny (pretty much brand new) threw in a new piston and all was good went to dumont for new years bike was running tits before i left within the first hour of riding it locks up again. The same damn thing happened burnt gears cogs pinions whatever you wanna call it. Has anyone heard of a defect in the oiling system in these things is the oiling bearing not doing what its supposed to im stumped. I had brand new motul in it so i know it had enough oil. I dont know any suggestions or anything info for that matter would be appreciated thanks Quote Link to comment Share on other sites More sharing options...
2001Stroker Posted January 10, 2009 Report Share Posted January 10, 2009 I don't know much about Banshee transmissions, but I do know that too tight of tolerances will do that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.