Keyser Soze Posted January 8, 2009 Report Posted January 8, 2009 Boogered up the threads on the ball joint, carter pin came out and it pancaked. Lower right from the back of the banshee, lower left it your facing it. Would be interested in a whole set, but would be looking to spend under 100. Quote
BUILDER Posted January 8, 2009 Report Posted January 8, 2009 Boogered up the threads on the ball joint, carter pin came out and it pancaked. Lower right from the back of the banshee, lower left it your facing it. Would be interested in a whole set, but would be looking to spend under 100. I think Nyuk has a lower right listed on ebay pretty cheap. Quote
bansheejoel Posted January 10, 2009 Report Posted January 10, 2009 Boogered up the threads on the ball joint, carter pin came out and it pancaked. Lower right from the back of the banshee, lower left it your facing it. Would be interested in a whole set, but would be looking to spend under 100. I Just upgraded to +2+1 arms and will give you a good deal on the complete stock a-arms and tie rods Quote
2001Stroker Posted January 10, 2009 Report Posted January 10, 2009 You want a stock set? I have my old complete set that I just took off my 2001. Upgrading to +3's, so I don't need them anymore. No bends, breaks, or cracks. Ball joints are as tight as new, and no cuts in any of the rubber boots. You can have tie rods, too. How's $80 shipped sound? PM if interested. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.