sheefreak Posted January 2, 2009 Report Posted January 2, 2009 Shearer SB SF Great shap, chrome scratched on underside(see pic). Can't see when on bike $475 Skat trak 22-11-8 72 rollout sls 12 paddle extremes on blue labels $350 +10 swinger link style /35 MM carrier, brake plate, and steel braided brake line. Chrome looks great except underside of carrier housing(see pic). Can't see when on the bike $450. Polished billet lowering block $35. Stock crank out of running 99 motor $75. CBR 600 shock w/polished linkage. Works well w/10 over swinger on Banshee $100. Tripple Chrome small block chevy fuel pump, new in box $85. Complete front brake setup w/ASV lever, good pads and rotors $125 Stock headlights $55. 36 MM keihen off 84 CR250 w/good K+N and outerware $75. Stock clutch and stator cover $40 shipped. 4 mill drag ported top end on alky by Patriot racing. Includes Pistons, RK TEK head w/custom cut alky domes for stroke. 180 PSI when I took apart. Hot Rods 4 mill stroker crank, trued and welded by Patriot w/TZ and max load bearing. Turn key 4 mill conversion, $750 shipped. Jugs are painted now, will blast an polish for an additional $100. Approx 90 horse, several members on site can vouch for this setup. Pics up soon. Quote
sheefreak Posted January 2, 2009 Author Report Posted January 2, 2009 (edited) Edited January 2, 2009 by sheefreak Quote
shanYE west Posted January 2, 2009 Report Posted January 2, 2009 ohh lord... What you got planned!?!? lol Bump for some good parts!! Quote
BansheeRider87 Posted January 2, 2009 Report Posted January 2, 2009 how much shorter is the rear cbr shock? Quote
sheefreak Posted January 2, 2009 Author Report Posted January 2, 2009 It is quite a bit shorter. It measures 11 1/2 inches. Quote
Blewbyu Posted January 2, 2009 Report Posted January 2, 2009 Damien has very nice stuff, that 4 mill setup is great too. Good luck buddy!! Quote
sheefreak Posted January 2, 2009 Author Report Posted January 2, 2009 Thanks Jeff. I am still trying to decide on length, but I need a swinger. I'll get w/ya. Shayne, just an A+S cub.... Still be be playin catchup w/you guys :happy: Quote
sheefreak Posted January 3, 2009 Author Report Posted January 3, 2009 Disassembled top end last night and one of pistons has stress crack so top end will be w/o pistons. $415 shipped for drag ported cyls and polished RK TEK head. $315 shipped for Hot Rods 4 mill stroke long rod w/TZ and max load trued and welded. All work done by Patriot Racing. Quote
lilmegill727 Posted January 3, 2009 Report Posted January 3, 2009 So do fish get thirsty? lol i saw that looking thru the pics too. take the dumb test Quote
sheefreak Posted January 3, 2009 Author Report Posted January 3, 2009 I don't know what the hell that is all about LOL. I usually use putfile to host pics, but had to go through somewhere else???? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.