CLutch ?

[MikeNick]

So I checked my clutch case oil today and the dipstick looked like it had strawberry milk on it so I figure the radiator hose that connects to the clutch case for the water pump is leaking. I soaked my clutch disks in Bel-Ray oil b4 installing them and that shit is $8 somethin a quart, question is when I put it all back together if I use some 10w-30 Valvoline or w/e else some guys use is it going to fuck up the clutch since it has been soaked in the Bel-Ray gear oil. I'm guessing I should probably just fork out the $20 bucks on 2 qts of Bel-Ray. Whatcha guys thinkin>>>!!!!

[1996dragshee]

lol well first off,you should find out why your oil looks like strawberry milk...thats not normal dude lol

 

and i change my oil probably 3-4 times a year and i fork over that 20 bucks every time..i only use 1 1/2 quarts each oil change though

[MikeNick]

lol well first off,you should find out why your oil looks like strawberry milk...thats not normal dude lol

 

and i change my oil probably 3-4 times a year and i fork over that 20 bucks every time..i only use 1 1/2 quarts each oil change though

 

 

Well Im guessin it looks that way because anti-freeze is leaking into the case from around that stem on the clutch cover..When I took it apart to put a clutch in it had alot of silicone around it and I didnt put that much on it when I reinstalled the cover. Just my guess..

[Wildcardracing]

I wouldn't rule out the water pump seal. There shouldn't have been any silicone on that tube, It is an o-ring seal where it goes into the water pump. That o-ring along with the clutch cover gasket should keep the coolant out of the transmission, if the o-ring failed the coolant would leak onto the upper case.

[clinton588]

So I checked my clutch case oil today and the dipstick looked like it had strawberry milk on it so I figure the radiator hose that connects to the clutch case for the water pump is leaking. I soaked my clutch disks in Bel-Ray oil b4 installing them and that shit is $8 somethin a quart, question is when I put it all back together if I use some 10w-30 Valvoline or w/e else some guys use is it going to fuck up the clutch since it has been soaked in the Bel-Ray gear oil. I'm guessing I should probably just fork out the $20 bucks on 2 qts of Bel-Ray. Whatcha guys thinkin>>>!!!!

 

If it's in the motor then it is the waterpump seal. I have had to fix this on many banshees. slobanshee06

is right, change the seal.

[MikeNick]

That seal is the one that the impeller shaft goes through right? Wheres the best place to order one at..