Jump to content

Recommended Posts

Posted

Whoa here. Thats not all you needed to know. Did it just start doing it? Is this a fresh rebuild and then you heard the noise? What if the noise is a loose stator or loose flywheel rivets? What if its a transmission noise? Start with isolating the noise, then go from there. Why not do a compression test or squish test before tearing apart the top end?

Posted

I would start off by pulling off the stator cover and put a socket on the flywheel bolt and rotate the engine forward and backward with the spark plugs removed.

 

*side note** check the spark plugs for any type of metal shavings or gray matter on the plugs*

 

this might help narrow down the area of the noise...

Posted

piston was slapping on the left cylinder, the tops of the pistons where PURE BLACK, like no silver at all just BLACK, and my domes where all black too i will get pics in the morning...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...