Blewbyu Posted September 29, 2008 Report Posted September 29, 2008 Please let me know what you have and pics, no junk. Not looking to spend a lot. Just putting on a quad to sell it. Quote
278 Posted September 29, 2008 Report Posted September 29, 2008 I have a stock head. One side has some groves in it from a piece of piston ring bouncing around, but its not real bad email me [email protected] and ill send you pics if you want you can have it if you pay for shipping Quote
278 Posted September 29, 2008 Report Posted September 29, 2008 (edited) Actually im having problems with my e-mail right now so here. stock head, One side has some groves in it from a piece of piston ring bouncing around, but its not real bad, it came off my running bike like 2 weeks ago so I can put a pro-design on, just need to be cleaned up. If you want it you can have it if you pay for shipping. Just PM me and will work out shipping if you want Edited September 29, 2008 by 278 Quote
Blewbyu Posted September 29, 2008 Author Report Posted September 29, 2008 Actually im having problems with my e-mail right now so here. stock head, One side has some groves in it from a piece of piston ring bouncing around, but its not real bad, it came off my running bike like 2 weeks ago so I can put a pro-design on, just need to be cleaned up. If you want it you can have it if you pay for shipping. Just PM me and will work out shipping if you want Hey man thanks for the offer. Not sure on the head, but ill get back to you, thanks Anyone else have a good topend they don't need, for instance went to or going to a cub. Quote
Wildcard2 Posted September 29, 2008 Report Posted September 29, 2008 around what are you looking to spend? I am getting ready to take my top end down to put a fresh top end together. My camara is in the shop at the moment. So i cant do pics. I will see if i can get some but the top end is good i have been riding all this season on it with no issues at all. let me know. Quote
Wildcardracing Posted September 29, 2008 Report Posted September 29, 2008 The top end mentioned above is on it's stock bore no portwork with the original pistons. Has 100psi on left 95psi on right at 5000' elevation. Can throw in a new head gasket. $300 shipped. Quote
Blewbyu Posted September 30, 2008 Author Report Posted September 30, 2008 The top end mentioned above is on it's stock bore no portwork with the original pistons. Has 100psi on left 95psi on right at 5000' elevation. Can throw in a new head gasket. $300 shipped. Sent PM Quote
arfountain Posted October 2, 2008 Report Posted October 2, 2008 Bump Hey Jeffrey I just bought a banshee about an hour ago I'm gonna part. Talk to Jeremy in the morning, I will hook you up. Quote
monster_energy06 Posted October 3, 2008 Report Posted October 3, 2008 i have a mint shape stock head here make me an offer... i also have 2 stock cylinders one is mint other u might get away with a good honeing. there .020 over i have one good pro lite piston let me know if u want anything Quote
jtraptor660 Posted October 20, 2008 Report Posted October 20, 2008 i might be pulling mine apart to go to a monoblock. they are stock cylnders with cross hatch boring and oversized rings. bored .60 over with 65.5mm wiesco pistons. all off a running banshee. 375.00 shipped can do a cool head with domes for another 175.00 +shipping Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.