TEXMEX Posted September 27, 2008 Report Posted September 27, 2008 So I have this pair to +2 Arms and a set of tie rods (13 1/2 in) with stock ends. Well I was washing my bike the other day and noticed that the two outer ends were bent on both sides. So I took them off to further investigate. Well when I originally bought the arms, they came with +2 rods as advertised. I am starting to think they are wrong. The 4 ends are only screwed in about 1/4 inch on both sides. So my question is, A: is it possible that I have +3 arms? or B: Is there some type of Muff up with the tie rods? I don Quote
xXBlessedWithDeathXx Posted September 29, 2008 Report Posted September 29, 2008 i believe +2 would be 12 3/4th long seeing my stockers are 10 3/4th Quote
Keyser Soze Posted September 29, 2008 Report Posted September 29, 2008 I have stock A-arms and ride tons of nasty trails. I kept bending the outers, or breaking. I went with 400ex tire rods and ends, no trouble yet. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.