okbasspro Posted September 26, 2008 Report Posted September 26, 2008 Hello I need the advice of some of the gurus on here I have done some mods to my motor and do not know where to start on my jetting and do not want to burn up the new motor here is a list of what I had and what I have now What I had stock bore and port T/5 pipes k&n with drilled airbox PWK 28s ran needle in 3rd clip mains 130 pilot 50 air screws out 1.5 What I have now +.020 bore ported and polished juggs ported reed cages milled head oof drag pipes with silencers +4 timming 2 into 1 toomey airfilter PWK 28s thanx for any help I can get Jeff Quote
okbasspro Posted September 26, 2008 Author Report Posted September 26, 2008 what kind of port? To be honest I do not know I bought them from Arfountain on here they look to just be cleaned up nothing real drastic still lots left in the middle support of the intake area Quote
Paddleboy Posted September 26, 2008 Report Posted September 26, 2008 hmm i am always talking to him about parts since he gets deals somehow and lives 40 mins away. but he had a couple shee's he was parting out so i dont kno which ones you got. try finding out cuz it will be differnt if its a play port compared to a dune. Quote
okbasspro Posted September 26, 2008 Author Report Posted September 26, 2008 Looks to be a dune port I run at about 1500 ft elevation Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.