BigRed350x Posted September 23, 2008 Report Posted September 23, 2008 Bought the carbs brand new from sudco and converted them myself. Had them for about 2 or 3 weeks. Still have the original boxes the carbs came in. .118 mains .118 dumps EGQ Needles on middle clip 58 Pilots Powerjets I put these on one of my banshee's for KOD and it never left my camp. I warmed the bike up in the morning two days and purged the bike before we loaded up to leave. Other than that, the carbs haven't been run. Still have the sudco stickers on them and look brand new. $385 + shipping Feel free to make other offers. I'm always open to trades or partial trades. Quote
BigRed350x Posted October 15, 2008 Author Report Posted October 15, 2008 $285 Shipped! Would go great on a stock stroke - 4mil duner / drag bike. Quote
joee20002 Posted October 15, 2008 Report Posted October 15, 2008 $285 Shipped! Would go great on a stock stroke - 4mil duner / drag bike. any pics and why are you selling them? i am very interested... Quote
BigRed350x Posted October 15, 2008 Author Report Posted October 15, 2008 any pics and why are you selling them? i am very interested... I can get pics tomarrow evening after work... I'm selling them because I don't really have anything I can run them on now. I run 38's on my duner, 41.5's on the K&T Trex and the Twister bike, and the cbr600rr raptor uses FCR's. I sold / traded any of the bikes I would run these on. I also have about 6 other sets of carbs... Quote
joee20002 Posted October 15, 2008 Report Posted October 15, 2008 I can get pics tomarrow evening after work... I'm selling them because I don't really have anything I can run them on now. I run 38's on my duner, 41.5's on the K&T Trex and the Twister bike, and the cbr600rr raptor uses FCR's. I sold / traded any of the bikes I would run these on. I also have about 6 other sets of carbs... ok sounds good.. i just have a stock stroke dune/drar port bike.. should work nice. Quote
joee20002 Posted October 16, 2008 Report Posted October 16, 2008 here is my email for the pics... [email protected] Quote
joee20002 Posted October 16, 2008 Report Posted October 16, 2008 here is my email for the pics... [email protected] Quote
BigRed350x Posted October 16, 2008 Author Report Posted October 16, 2008 I removed the over-flow tube from the inside of the bowls so I could use the factory barb on the outside as the supply line for the powerjets. The insides have been milled down to ensure the powerjet gets enough fuel. Quote
NOS_350x Posted October 16, 2008 Report Posted October 16, 2008 Just throwin this out there, Trade for set 37mm pj's?? Quote
BigRed350x Posted October 17, 2008 Author Report Posted October 17, 2008 Just throwin this out there, Trade for set 37mm pj's?? I already have 38's 39's 40's and 41.5's... Thanks though. Just looking to sell them outright. - Jared Quote
bonbon Posted October 18, 2008 Report Posted October 18, 2008 BUMP! Now let me ride your new bike.......... Quote
BigRed350x Posted October 18, 2008 Author Report Posted October 18, 2008 BUMP! Now let me ride your new bike.......... We will have to teach you on the override... and order you some iron ankle protectors. haha! Rick wants to do a sand mountain trip in nov. want to come? - Jared Quote
FireHead Posted October 19, 2008 Report Posted October 19, 2008 Bought the carbs brand new from sudco and converted them myself. Had them for about 2 or 3 weeks. Still have the original boxes the carbs came in. .118 mains .118 dumps EGQ Needles on middle clip 58 Pilots Powerjets I put these on one of my banshee's for KOD and it never left my camp. I warmed the bike up in the morning two days and purged the bike before we loaded up to leave. Other than that, the carbs haven't been run. Still have the sudco stickers on them and look brand new. $385 + shipping Feel free to make other offers. I'm always open to trades or partial trades. Will they convert back to gas with out welding? :geek: Quote
Wildcardracing Posted October 19, 2008 Report Posted October 19, 2008 We will have to teach you on the override... and order you some iron ankle protectors. haha! Rick wants to do a sand mountain trip in nov. want to come? - Jared Maybe I'll have to wait to tear down my bike and see how the weather is in Nov. I'm down for a day at the dunes if you guys can make it out. I'd love to see that twister run. Bump, for a hell of a guy. Someone should pick these up, it's a steal of a deal...I'd be all over it if I had the cash. Quote
BigRed350x Posted October 22, 2008 Author Report Posted October 22, 2008 Will they convert back to gas with out welding? :geek: No. Extensive welding will be necessisary. I suggest totally melting them down and re-casting them in this case. :biggrin: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.