POORBOY350 Posted September 23, 2008 Report Posted September 23, 2008 i have a cheetah cub motor and i've noticed some oil spattering around wherer the exhaust meets the cylinders. ppl on here have told me to just put some high temp gasket maker on there and im just wantin more oppinions on what to do. if thats the case then good ill go do it asap. what do yal do? also im wondering what the best oil would be to put in bottom end... just wanna change it to make me feel better. and i have been mixing my oil 32:1 or 4 ounces to a gallon. with 111 octane racing fuel. ive been using castor927 i think. but it is castor 927 i believe it is a pro series racing formula. is there a better mixture or better oil or gas. also im on ms gulf coast so i'd say sea level. not 100% what im at but im on the gulf coast if that gives you an idea. thanks for any advice pointer ect. thanks. Quote
POORBOY350 Posted September 24, 2008 Author Report Posted September 24, 2008 ANYONE........... ANYONE.................... Quote
gclark63 Posted September 24, 2008 Report Posted September 24, 2008 ANYONE........... ANYONE.................... I use silkolene synth.@ 40:1. Pick a good synthetic. Really that is almost like asking what do you like better ford or chevy? Its a matter of preferance. Ask the local bike shop what they run in thier bikes. Nice plastic by the way! Quote
POORBOY350 Posted September 24, 2008 Author Report Posted September 24, 2008 I use silkolene synth.@ 40:1. Pick a good synthetic. Really that is almost like asking what do you like better ford or chevy? Its a matter of preferance. Ask the local bike shop what they run in thier bikes. Nice plastic by the way! ha ha you to! thanks i was jsut wondering if there was a specific kind to run in it. Quote
Hilarious Posted September 24, 2008 Report Posted September 24, 2008 i have a cheetah cub motor and i've noticed some oil spattering around wherer the exhaust meets the cylinders. ppl on here have told me to just put some high temp gasket maker on there and im just wantin more oppinions on what to do. if thats the case then good ill go do it asap. what do yal do? also im wondering what the best oil would be to put in bottom end... just wanna change it to make me feel better. and i have been mixing my oil 32:1 or 4 ounces to a gallon. with 111 octane racing fuel. ive been using castor927 i think. but it is castor 927 i believe it is a pro series racing formula. is there a better mixture or better oil or gas. also im on ms gulf coast so i'd say sea level. not 100% what im at but im on the gulf coast if that gives you an idea. thanks for any advice pointer ect. thanks. i'd look at putting new o-rings in the pipe flanges. i use the 927 @ a 32:1 ratio and have not had any problems. i also use the maxima mtl in the trans. Quote
POORBOY350 Posted September 24, 2008 Author Report Posted September 24, 2008 thats what i mixed it also so thats good cough sandhill cough cough..... :biggrin: Quote
POORBOY350 Posted September 24, 2008 Author Report Posted September 24, 2008 and thanks for replying man ima look into getting some of them o rings. ill get bakc with ya later gotta go to work Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.