OKCterror Posted September 22, 2008 Report Posted September 22, 2008 Fmf fatties into powercores, pods, stock carbs, milled head by .035. Bike bogs when first taking off and have to seriously give it gas and clutch it to work. Jet suggestions??? Quote
dragbanshee Posted September 22, 2008 Report Posted September 22, 2008 Fmf fatties into powercores, pods, stock carbs, milled head by .035. Bike bogs when first taking off and have to seriously give it gas and clutch it to work. Jet suggestions??? What new have you done to it? If anything, did it just start doing it withouy any mods being added? Quote
OKCterror Posted September 22, 2008 Author Report Posted September 22, 2008 i jetted it with the fatties and open air box on it. Then i switched to twin pods and milled head. I know its te jetting, got a 300or305 in it. Quote
ASRBanshee Posted September 22, 2008 Report Posted September 22, 2008 No such thing as 305 mains. It goes in intervals of 10. I would try 330 mains and 27.5 pilots. http://www.dfn.com/benkaren/jetfaq.html Quote
jrod Posted September 22, 2008 Report Posted September 22, 2008 No such thing as 305 mains. It goes in intervals of 10. I would try 330 mains and 27.5 pilots. http://www.dfn.com/benkaren/jetfaq.html ya man you will have to serioiusly jet that bitch up with those pods. Quote
mopar1rules Posted September 23, 2008 Report Posted September 23, 2008 mine does the same thing....you need to rev up and clutch the bitch to take off. mines ported tho, and i already have 27.5's, so i'm going to go up to 30's. for you tho, go to at least 27.5's, needle clip postion stock w/stock needle, and run like 320-330 mains. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.