T5 Install Help Please

[05.Banshee.SE]

1. Does anyone have Toomey T5s that can take pictures of the whole pipes installed?

(From where it attaches to the motor, all the way to the silencers, multiple close up pictures.)

 

It seems like they are to short for my bike??

 

Things just aren't lining up right, I keep trying to move them around.

 

Was anyone able to put them on using stock hanging equipment?

[dragbanshee]

1. Does anyone have Toomey T5s that can take pictures of the whole pipes installed?

(From where it attaches to the motor, all the way to the silencers, multiple close up pictures.)

 

It seems like they are to short for my bike??

 

Things just aren't lining up right, I keep trying to move them around.

 

Was anyone able to put them on using stock hanging equipment?

 

Yea stock front hangers and what they give you for the rear, just be patient and work with it, it will go.

 

And use the stock pipe connectors unless you have aftermarket ones, the rubber ones.

 

Let the hangars hang loose untill pipes are in place.

[05.Banshee.SE]

I got it, there's only one right way to do it, and I didn't get it right away.

 

Thanks.

[SAVAGE420]

Make sure you put the stinger tubes on the right sides.

 

Look at the flange part on both tubes where they bolt up to the mufflers, there will be a "R" on one and the other will have an "L" stamped on them meaning one for the left and one for the right.

 

Look closely cause they are a small stamp.

 

If you really need pics i can take some of my T5's and shoot them your way man.