oh6banshee Posted September 11, 2008 Report Share Posted September 11, 2008 Just got my F.A.S.T sync tool and just wanted to make sure my thinking is correct. First of all I dont have the tors removed yet, I know, I know, I know! With that being said, what are the steps to syncing. From what I saw on youtube I will take my pods off and adjust the tors screw to make sure that both slides start moving up at the exact same time. Then from there I was going to start the quad and adjust the idle with the pilot screw so that both carbs have the same reading, and then do the same at half throttle. Now heres where im confused, if you re-adjust the pilot screw at half throtle wont that affect what you just did at idle. Fuck this, Im out, Im buying a four stroke! :biggrin: Quote Link to comment Share on other sites More sharing options...
Wildcard2 Posted September 11, 2008 Report Share Posted September 11, 2008 easy there patient one. go to FAST's website he might have more on there. Quote Link to comment Share on other sites More sharing options...
Bill Posted September 11, 2008 Report Share Posted September 11, 2008 Adjust the pilot screws for idle, then at half throttle adjust those big flat head screws on the top of the tors.It is much easier once you get rid of tors. Quote Link to comment Share on other sites More sharing options...
oh6banshee Posted September 11, 2008 Author Report Share Posted September 11, 2008 I would never go to the dark side ( :biggrin: ). I knew it was simple, just didnt want to make it hard, this site is great! Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.