OKCterror Posted September 8, 2008 Report Share Posted September 8, 2008 Ok so im adding the head that bansheedan milled down to .035. Removed my rad hoses and drained then flushed the coolant since im switching to ice, then removed the head. I was surprised at how clean it is, but the pistons....you tell me. Plugs arent foulled, and the sleeves are nice and smooth, no scratches, dings, nicks, nothing. Tell me if this is good bad or normal. Left Right Head that came off motor pulled pump cover and fins are good, no cracks. reinstalled with locktight instant gasket if this all goes good im going to post up a how to on installing/ removing head to coolhead-maybe Quote Link to comment Share on other sites More sharing options...
gumby6t9 Posted September 8, 2008 Report Share Posted September 8, 2008 Did you do a compression test before tearing it apart? Quote Link to comment Share on other sites More sharing options...
OKCterror Posted September 8, 2008 Author Report Share Posted September 8, 2008 no but it was finally running perfect. No bog, power threwout the band, no smoke, running 32:1 Quote Link to comment Share on other sites More sharing options...
gumby6t9 Posted September 8, 2008 Report Share Posted September 8, 2008 Put it back together and run it for the rest of the season. Throw some new pistons in it this winter. Quote Link to comment Share on other sites More sharing options...
Hilarious Posted September 8, 2008 Report Share Posted September 8, 2008 it looks fine to me. some may argue that you are rich from amount of carbon on the crown on the piston. put it back together and ride it. :thumbsup: Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted September 8, 2008 Report Share Posted September 8, 2008 it looks fine to me. some may argue that you are rich from amountof carbon on the crown on the piston. put it back together and ride it. :thumbsup: I agree 100% Looks a little rich, otherwise fine. Quote Link to comment Share on other sites More sharing options...
OKCterror Posted September 8, 2008 Author Report Share Posted September 8, 2008 getting ready to do just that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.