What did i get into

[OKCterror]

Ok so im adding the head that bansheedan milled down to .035. Removed my rad hoses and drained then flushed the coolant since im switching to ice, then removed the head. I was surprised at how clean it is, but the pistons....you tell me. Plugs arent foulled, and the sleeves are nice and smooth, no scratches, dings, nicks, nothing. Tell me if this is good bad or normal.

 

Left

 

Right

 

Head that came off motor

 

pulled pump cover and fins are good, no cracks. reinstalled with locktight instant gasket

 

if this all goes good im going to post up a how to on installing/ removing head to coolhead-maybe

[gumby6t9]

Did you do a compression test before tearing it apart?

[OKCterror]

no but it was finally running perfect. No bog, power threwout the band, no smoke, running 32:1

[gumby6t9]

Put it back together and run it for the rest of the season. Throw some new pistons in it this winter.

[Hilarious]

it looks fine to me. some may argue that you are rich from amount

of carbon on the crown on the piston. put it back together and ride it. :thumbsup:

[LiftdT4R]

it looks fine to me. some may argue that you are rich from amount

of carbon on the crown on the piston. put it back together and ride it. :thumbsup:

 

I agree 100% Looks a little rich, otherwise fine.

[OKCterror]

getting ready to do just that