TLONG

wanna sell the k&n's seperate

YEA I AGREE ACETONE SHOULD WORK

MAKE SURE YOUR PETCOCK IS NOT PART. BLOCKED--I HAD THIS SAME PROBLEM AND MINE WAS BAD (OLD) GAS--BUT I'M SURE SOMEONE ELSE WILL KNOW MORE ABOUT THIS--JUST TELLING U WHAT MY PROB WAS--HOPE THIS HELPS-

MX i sent u a pm-thanks--by the way--for the banshee

MX i sent u a pm-thanks

WELL I STILL HAVE NOTHING?--THE SHEE IS DEAD IT WON'T DO ANYTHING--I CLEANED THE CARBS CHECKED FOR AIR LEAKS AROUND THE CARBS,I UNHOOKED THE TORS JUNK,I HAVE SPARK BUT IT WILL NOT CRANK--I GOING TO TRY TO PULL CRANK IT AGAIN TOMMORROW AND THEN I DON'T KNOW WHAT TO DO???MAN I DON'T WANT TO TAKE IT TO THE DEARERSHIP THAT IS A RIP OFF---PLEASE ANY OTHER IDEAS OH YEA I TRYED NEW PLUGS ALSO---THANKS

i put in them right---the throttle works fine untill i put the slide in then it has alot of slack

ok i checked for air leaks and found none then i pulled off the carbs cleaned them good and got them back on and THEN went to put the tors thing back on top of the carb and now i have alot of slack in my throttle cable--wtf? could i have stretched the cable that much i don't think i stretched it at all so now i "think" my original problem might be corrected but now i have another thanks for all the input one the first one can someone help me with this one---thanks again btw how much $$ is it to remove the tors crap off the carbs--

thanks nasty i'll try that--i knew i could count on u guys

well let me start by saying it has not be cranked in about 2 months. i went to crank it and it would not do anything so i had it pulled to get it to run and when it fired up it revved real high and i think only one side was doing anything at first then the other side finally come in---like a say it revs real high without touching the throttle then it will dye down and it will not idle with the choke on or off. any help would really be appreciated.thanks alot in advance

i need one 10 inch rear rim--it needs to fit a banshee or a 400ex--let me know what u have thanks

what kind is the graphics kit is it??

sent u a pm

i'm interested in the pro-wedges got any pics if so post em --thanks

are u for real???

if u don't have any to trade then this does not concern u

MY OFFER STILL STANDS

I'D LIKE TO TRADE A SET OF REAR 400 EX REAR RIMS AND TIRES FOR A SET OF REAR PADDLES AND RIMS, RIMS ARE ALMOST MINT AND TIRES HAVE AROUND 75 TO 80% TREAD LEFT(HAVE 1 PLUG BUT DOES NOT AFFECT TIRE IN ANY WAY) I NEED THEM TO FIT EITHER A BANSHEE OR A 400EX--I CAN SWAP HUBS LET ME KNOW WHAT U HAVE---THANKS TIM

still have mine...if u want to trade :!: