2001 929

NO WAY

THIS LIKE NEW. IT WAS REVALVED AND RESPRINGED BY EIBACH. THIS ALSO COMES WITH THE STOCK SPRING. PM WITH OFFERS. PICS LATER THIS WEEK.

HAVE A SET OF PAUL TURNER MID-RANGE PIPES WITH POLISHED FAT BOY SILENCERS, THE PIPES ARE TRIPLE CHROMED. THEY HAVE VERY LITTLE BLUEING AND ARE IN AWESOME SHAPE. WILL POST PICS LATER THIS WEEK. PM ME WITH OFFERS.

THESE ARE LIKE NEW, THEY HAVE A COUPLE RIDES ON THEM AND THAT IS IT. THE FRONT HAS A POLISHED BILLET GRILL ALSO. MAKE OFFERS. WILL POST PICS LATER THIS WEEK. PM IF INTERESTED.

ENDS SUNDAY

1000.00

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...TRK%3AMESE%3AIT

on ebay http://cgi.ebay.com/ebaymotors/ws/eBayISAP...AMESE%3AIT&rd=1

TTT PIC http://www.imagestation.com/picture/sraid2...fa/ee881b77.jpg PIX http://www.imagestation.com/picture/sraid2...52/ee881937.jpg http://www.imagestation.com/picture/sraid2...07/ee8818df.jpg

if anyone is interested in something like this pm me, i will have pics posted in next couple days when i finish assembling it, briefly this is what it is: '89 roller with FRESH orange powdercoat then cleared with the 4 hubs also coated orange. powdercoated almost chrome include: spindles, steering stem, swingarm and carrier, brackets, sprocket and brake hub. painted this almost chrome are tension rods, a-arms and j-arms comes with full set of black painted plastic with seat '02 stock wheels and tires with 80% tread remaining billet pieces:throttle cover, front ressy cover, block off plate, lonestar bar clamp renthal bars everything has new bearings installed complete electrical system pm with interests and/offers.

sounds like alot of nice rides will be there, wish i could show up!

just dont buy a used one from someone that tears shit up, i have a buddy with a used banshee axle in good condition, and another buddy with a polished one in excellent condition. and if u want to narrow it up, buy a raptor axle

its called making power

buy a used axle

planetsand is where you will get serious info on making serious power, more directed toward drag racing!

what is current compression? in them 5 hours of riding, any changes, or just normal riding, explain? has there been a change in weather temperature from that time to now? you said you cleaned carbs, did you take out pilots make sure there wasnt something plugging a hole, the holes are tiny so it dont take much, totally disassemble, clean with carb cleaner and then spray with compressed air.

check your reeds,

make sure jetted right, unplug tors

easy without an impact also, just make a holding tool which goes in the holes of the flywheel(not to deep where it hits the stator), put a handle on it and its all over.

SOLD

where would this be shipped to.

3

2